8 Port 100Mbps POE Switch for IP camera(SST-P8EHA)
Product Introduction:
8-Ports 100M Ethernet Power Switch (PoE Switch), using high-quality high-speed network IC and the most stable PoE chip, PoE Port support 802.3af and 802.3at standard both, this series of PoE Switch can be 10/100M Ethernet The network provides a seamless connection, and the PoE power port can automatically detect and power the powered devices that comply with the IEEE802.3af or IEEE802.3at standards. The non-PoE device intelligently detects no power and only transmits data.
PoE is Power over Ethernet, which refers to the transmission of data signals to some IP-based terminals (such as IP phones, wireless access APs, network cameras, etc.), but also provides DC power for this device. Technology, these devices that receive DC power are called powered devices.
With simple and convenient installation and maintenance methods and rich business features, it helps users to build a safe and reliable high-performance network. It is mainly located in the core or convergence layer of user networks such as industrial parks, buildings, factories and mines, government agencies, and residential broadband; it can be widely used in Ethernet access scenarios such as small and medium-sized enterprises, Internet cafes, hotels, and schools.
Product Feature:
● 8*10/100M POE ports + 2* 10/100M Ethernet Uplink ports;
● Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3af/at standards;
● Ethernet port supports 10/100M adaptive and POE functions;
● Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard;
● Support port auto flip (Auto MDI/MDIX);
● Automatically supplied to adaptive devices;
● Panel indicator monitoring status and help failure analysis;
● Support for VLAN mode, OFF mode and Extend mode;
● Support Watchdog Function;
● Lightning Protection Surge: General Mode 6KV, Differential Mode 4KV, ESD 8KV.
Physical Application Reference:
Product Name |
10-Ports PoE Switch |
Model |
SST-P8EHA |
Connector Type |
8 Port 10/100M PoE + 2 Port 10/100M Ethernet Uplink |
Professional High-Power Switch with 8 PoE+ Ports Function:
The PoE watchdog continuously monitors the connection status of remote hosts. If an error is detected on the remote PoE device, the PoE switch immediately restarts the device to bring it back to normal operation. | Plug and Play, Easy of use.Fanless design for silent operation. Made of high-quality metal case, sturdy and durable with long service life, provide better heat dissipation, suitable for most environment. Pin assignment, Mode A: 1/2(+), 3/6(-) |
Product Technical Parameters:
Network Protocols |
IEEE802.3 |
PoE Parameters |
PoE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w) |
DIP |
VLAN: Port isolation mode. In this mode, the PoE ports (1-8) of the switch cannot communicate with each other, and can only communicate with the UP-link port. The port AI mode is turned on. |
Default: Normal mode, all port can communicate with each other, the transmission distance is within 100 meters, the transmission rate is 10M/ 100M adaptive; The port AI mode is closed. | |
Extend: Link extension mode, 1-8 ports PoE power supply and data transmission distance can be extended to 250 meters, the transmission rate becomes 10M, and the port AI mode is turned on. | |
Network Media |
10BASE-T: Cat 3,4,5 UTP(≤100 meter) |
Power Supply |
Power input: AC100-240V 50/60Hz, Output: 52V2.3A, Power Budget: 120W |
Performance Specification |
Bandwidth: 2Gbps |
MAC Address: 1K | |
Packet Buffer Memory: 448K | |
Packet Forwarding Rate: 0.1488M pps/each port | |
Forwarding Mode: Store-And-Forward | |
Working Environment |
Operating Temperature: -20℃ ~ 50℃; |
Physical Parameter |
Product Dimension (L*W*H): 200mm*120mm*45mm |
Package Contents |
1.Ethernet Switch: 1 unit |
Certification |
CE, RoHS, FCC, CCC |
Warranty |
2 years warranty |
http://www.sunsoont-networks.com/